2gig Technologies EDGE Manual

2GIG EDGE Smart Home Manual
18
Missing Information
If a device is missing information after its inclusion,
the device will display in yellow.
1. Tap the Notication.
Tapping the Notication will display this message.
2. Tap OK, then tap DONE to return to the
Z-Wave Settings screen.
3. Tap Check Network (see next page).
Remove a Failed Smart Home Device
1. Tap REMOVE to remove a failed device from
the system.
2. Once alerted that the removed was successful,
tap OK.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English