2gig Technologies EDGE Manual

2GIG EDGE Smart Home Manual
8
Smart Areas
The Smart Areas screen provides access to controls
and status of all Smart Areas from the main panel or
EDGE Remote Keypads.
The Smart Areas Button will change color to indicate
status of the Smart Areas:
1. Press the Smart Areas button on the Home
screen.
2. Enter user code – the user code controls access
to the Smart Areas. After authentication, the
Smart Areas screen will only show the Smart
Areas the user is assigned.
3. The Smart Areas screen will display status for
each Smart Area similar to the panel’s home
screen.
Smart Areas – Notications
The notications icon will appear in a Smart Area if
troubles or alarms exist.
Status Examples:
1: Ready to Arm
2: Ready to Arm (BYPASS)
3: In Alarm
4: Armed Away
5: Not Ready to Arm
6: Disabled
1. Tap the notication icon
2. Tap the Alert or Message.
NOTE: This popup only appears if the Alarm and Alert
conditions are present at the same time.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English