Copyright © 2021 Nortek Security & Control LLC
15
2. Tap > next to Device Name.
Identify a Smart Home Device
1. Tap IDENTIFY. The system will identify the
device.
2. The Identify option should turn the device On
and Off to identify the node.
3. Use the keyboard to enter the new name, then
tap UPDATE.
Add Device
Pair a Z-Wave compatible device with the panel.
1. Tap Add Device. The Add Smart Home
Device appears.
NOTE: It’s recommend that Z-Wave devices be removed
before attempting to add them to the panel. This
process clears any previous Z-Wave pairing information
from the device.
NOTE: See Remove Device, page 17, for instructions
on removing a device.
To Next Page
Loading...
Need help?
General
