4.2.3.4.3 Application Settings
The Settings section helps you set the parameters. The following 2N Helios IP Mobile
®
options are available:
Device name – device name under which identifies itself to 2N Indoor Touch
®
other LAN devices via .2N Helios IP Mobile
®
Default DTMF Lock – select the lock to be used during a call by pressing the lock
button. Lock 1 is the default value.
Ringing tone – select the ringing tone.2N Helios IP Mobile
®
My2N - Mobile Video
Allow – enable/disable the service. When the function is 2N Mobile Video
®
enabled, more settings will become available.
Device ID – device ID assigned .2N Mobile Video
®
Password – automatically generated device password for connection to 2N
. Mobile Video
®
SIP proxy
Allow – enable/disable SIP Proxy.
Username – SIP Proxy server username.
Password – SIP Proxy server user password.
SIP Proxy – SIP Proxy server IP address or domain name.
Port – SIP Proxy server connection port (default port: 5060).
Proxy transport – select the transport protocol: TCP or UDP.
Deactivation time – time for transition from the active video view back to List of
devices.
Earlymedia – enable/disable video stream transmission during incoming ringing
from the SIP Proxy registered devices.
Caution
Earlymedia is always enabled for .2N Mobile Video
®
To Next Page
Loading...
