5.3.1 Network
This tab includes the Ethernet adapter settings in .2N Indoor Touch
®
DHCP is enabled – Yes/No – displays whether it is allowed/disallowed to get
setting from DHCP
IP Address – current IP address
IP Mask – current mask
IP Gateway – current gateway
IP DNS – DNS server used
Change Settings – display a setting changing dialogue
Enable DHCP – enable/disable getting of settings from DHCP; when
disabled, the remaining IOP addresses will be displayed
IP Address – device IP address setting
IP Mask – mask setting
IP Gateway – network gateway setting
IP DNS – DNS server setting
To Next Page
Loading...
