Press and hold the lock button to display the lock list (locks 1–4) to
control all the locks (not only the default one).
Click the name of the device added using Phonebook via 2N
®
Helios IP
My2N to set up a call with the device immediately. During the call, the
microphone on the application side is muted so that the visitor cannot
hear you. This mode is suitable for remote silent monitoring of the space
in front of the door. This mode is only available to the 2N
®
Helios IP
devices. Standard calls can only be made to other applications or the 2N
devices. IndoorTouch
®
Caution
It is impossible to send the DTMF code from the application outside a
call for technical reasons. Therefore, if you press the lock outside a call in
the SIP Proxy mode, a call is set up first during which the DTMF is sent
automatically.
If the device and the application are in one and the same Helios IP 2N
®
LAN, the incoming call is always identified as a LAN call even if it goes
via a SIP Proxy server. If you require SIP Proxy identification and the
application and share one and the same LAN, set a 2N
®
Helios IP
different password in the 2N Helios IP Group Authentication
®
application.
Earlymedia is always enabled for the My2N mode. This means that the
calling door unit video is displayed by the application during ringing.
Warning
Remember that calls from a phone that uses data connection instead Wi-
Fi consume data from your mobile provider's data package!
To Next Page
Loading...
