3Com 4210G Series - Displaying the Source Ip Address;Interface Specified for Telnet Packets

7-2
To do… Use the command… Remarks
Specify source IP
address/interface for Telnet
packets
telnet client source { ip
ip-address | interface
interface-type
interface-number }
Optional
By default, no source IP
address/interface is specified.
z The IP address specified must be a local IP address.
z When specifying the source interface for Telnet packets, make sure the interface already exists.
z Before specifying the source IP address/interface for Telnet packets, make sure the route
between the interface and the Telnet server is reachable.
Displaying the source IP address/Interface Specified for Telnet
Packets
Follow these steps to display the source IP address/interface specified for Telnet packets:
To do… Use the command… Remarks
Display the source IP
address/interface specified for
Telnet packets
display telnet client configuration Available in any view