5-7
Configuring Errored Symbol Event Detection
An errored symbol event occurs when the number of detected symbol errors over a specific detection
interval exceeds the predefined threshold.
Follow these steps to configure errored symbol event detection:
To do… Use the command… Remarks
Enter system view
system-view —
Configure the errored symbol
event detection interval
oam errored-symbol period
period-value
Optional
1 second by default
Configure the errored symbol
event triggering threshold
oam errored-symbol threshold
threshold-value
Optional
1 by default
Configuring Errored Frame Event Detection
An errored frame event occurs when the number of detected error frames over a specific interval
exceeds the predefined threshold.
Follow these steps to configure errored frame event detection:
To do… Use the command… Remarks
Enter system view
system-view —
Configure the errored frame
event detection interval
oam errored-frame period period-value
Optional
1 second by default
Configure the errored frame
event triggering threshold
oam errored-frame threshold
threshold-value
Optional
1 by default
Configuring Errored Frame Period Event Detection
An errored frame period event occurs if the number of frame errors in specific number of received
frames exceeds the predefined threshold.
Follow these steps to configure errored frame period event detection:
To do… Use the command… Remarks
Enter system view
system-view —
Configure the errored
frame period event
detection period
oam errored-frame-period period
period-value
Optional
1000 milliseconds by default
Configure the errored
frame period event
triggering threshold
oam errored-frame-period
threshold threshold-value
Optional
1 by default
Configuring Errored Frame Seconds Event Detection
An errored frame seconds event occurs when the number of error frame seconds detected on a port
over a detection interval exceeds the error threshold.
To Next Page
Loading...
