3Com SuperStack 3 NBX - Enabling System-Wide Silence Suppression

108 CHAPTER 2: DIAL PLAN
4 To enable audio compression on VTL calls, click the Audio Compression
on VTL Calls check box and then click OK.
Enabling
System-wide Silence
Suppression
You can enable or disable silence suppression on a system-wide basis for
VTLs. The default condition disables silence suppression. When you
enable VTL silence suppression on an NBX system, the VTL software
attempts to use silence suppression on all VTL calls. If the other NBX
system is not configured to support silence suppression, the local VTL
software attempts to find a compatible communications mode.
To enable silence suppression on VTLs:
1 In the NBX NetSet - Main Menu window, click System Configuration.
2 Click the System Settings tab and then click the System-wide button. The
System Configuration - System Settings dialog box (Figure 40
) appears.
3 To enable silence suppression on VTL calls, click the System-wide Silence
Suppression on VTL Calls check box, and then click OK.
Figure 40 System-wide Setting Dialog Box