3Com SuperStack 3 NBX - Removing a Telephone Group

Creating and Managing Telephone Groups 165
Figure 58 Modify Telephone Group Dialog Box
5 Change the name of the telephone group in the Group Name: field.
6 To set call recording and monitoring as the default condition for all
telephones in this telephone group, enable the Call Record & Monitor
check box. To disable call recording and monitoring, clear the check box.
You must have installed a call recording license before you can enable the
Call Record & Monitor check box.
7 Click OK.
Removing a
Telephone Group
You can remove a telephone group if it is no longer needed.
To remove a telephone group:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
)
2 Click the Telephone Groups tab. The Telephone Groups dialog box
appears (Figure 56).
3 Select the group you want to remove.
4 Click Remove. A confirmation window appears.
5 Click Yes.
The system removes the group.