3Com SuperStack 3 NBX - Adding an Extension List

64 CHAPTER 2: DIAL PLAN
From the Extensions List tab of the Dial Plan window, you can perform
these tasks:
■ Adding an Extension List
■ Modifying an Extension List
■ Removing an Extension List
The system restricts access to any specific Analog Line Card port or Digital
Line Card port. To directly dial the extension number that is associated
with one of these devices, you must have diagnostic privileges. In
addition, you cannot dial a prefix to obtain a Digital Line Card port.
Adding an
E
xtension List
To add a new extension list:
1 From the Dial Plan window (Figure 3), click the Extension Lists tab
(Figure 11
).
Figure 11 Extension Lists Tab