3Com SuperStack 3 NBX - Modifying a Telephone

150 CHAPTER 3: DEVICE CONFIGURATION
4 Click Apply to configure this telephone. You can then configure
additional telephones using the same menu.
5 Click OK.
Modifying a
Telephone
To modify a telephone:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
). The Telephones tab
is the default tab.
2 Select the telephone that you want to modify from the list.
3 Click
Modify. The Modify Telephones dialog box appears (Figure 51).
Line Appearance/BLF
Disabled
Disables Line Appearance/BLF for this telephone.
Paging Output
Disabled
Prevents this telephone from playing NBX system pages.
Extension Number The telephone’s dialing extension. By default, the system
automatically assigns the lowest unused Extension. You can
change it to any unused number between 100 and 449
(3-digit dial plan) or 1000 and 3999 (4-digit dial plan).
First Name,
Last Name, Title,
Location 1,
Location 2, and
Department
These optional fields appear in lists that display the telephone
and can help you identify it. Last Name is used to find a user
in the dial by name directory of the Auto Attendant.
Location 1 and Location 2 enable you to provide detailed
information about the location of the telephone (required for
E911 (Enhanced 911) emergency service).
Table 23 Add Telephone Dialog Box Fields (continued)
Field Description