3Com SuperStack 3 NBX - Modifying a Telephone Group

164 CHAPTER 3: DEVICE CONFIGURATION
Figure 57 Add Telephone Group Dialog Box
4 Enter the name of the new group in the Group Name: field.
5 Select an entry from the Telephone Type pull-down list.
6 To enable call recording and monitoring as the default setting for all
telephones in this group, enable the Call Record & Monitor check box.
7 Click OK.
The group now appears in the Telephone Group group list box.
Modifying a
Telephone Group
You may want to change the name of a telephone group to reflect a
change in your organization, or you may want to change whether the
group is configured for call recording and monitoring.
To change the name of a telephone group:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
).
2 Click the Telephone Groups tab. The Telephone Groups dialog box
appears (Figure 56
).
3 Select the group whose name you want to change.
4 Click Modify. The Modify Telephone Group dialog box appears
(Figure 58
).