460 APPENDIX C: CONFIGURING OPTION 184 ON A WINDOWS 2000 DHCP SERVER
3 Click Add. The Option Type dialog box appears.
4 In the Name field, type a name of your choice. For example, because you
are configuring this option to work with the NBX system, you might
choose NBX as the name.
5 From the Data Type pull-down list, select Byte.
6 Enable the Array check box.
7 In the Code text box, type 184.
8 In the Description text box, enter a description of your choice. Example:
NBX NCP IP Address.
9 Click OK.
In the Predefined Options and Values dialog box, the DHCP Microsoft
Management Console creates a new option name by combining the
option number with the name that you chose and adds this name to the
Option name pull-down list. Example: If you used NBX as the option
name, the system adds 184 NBX to the pull-down list.
Editing Option 184
Values
1 Select the new option name from the Option name pull-down list, and
click Edit Array. The Numeric Value Array Editor dialog box appears.
2 In the Data entry area of the dialog box, click the Decimal radio button at
the right of the word Format.
3 In the Current Values text box, highlight the 0 (zero), and click Remove.
4 To create the new value, enter each element of the new value:
a Click in the New value text box.
b Type the individual element value.
c Click Add.
5 Repeat steps 4 a, b, and c for each element. As you add each element, it
appears in the Current values list, above previously added values.
Add these elements in this order:
What you type Description
1 Enter 1 as the only suboption code for option 184. (Some
options can have more than one suboption.)
To Next Page
Loading...