5
SYSTEM CONFIGURATION
This chapter provides information about using the System Configuration
function of the NBX NetSet
™
utility to configure system level settings. It
covers these topics:
■ System Settings
■ Speed Dials
■ Business Identity
■ Security
■ TAPI Settings
■ Disk Mirroring
System Settings You can use the System Settings tab to configure these system-level
items:
■ System-wide Settings
■ Regional Settings
■ Date and Time
■ Timers
■ Ringing Patterns
■ Multicast Addresses
■ IP Addresses
■ Maintenance Alerts
On the System Settings tab, you can also view the current system
settings, such as the software version, the IP address of the system, and
the amount of free memory. Table 50
describes the fields.
To view system settings, select System Configuration > System Settings.
To Next Page
Loading...