Configuring and Managing T1 Digital Line Cards 321
Figure 139 Modify Digital Line Card IP Settings Dialog Box
Removing a T1 Digital
Line Card
You can remove a T1 Digital Line Card at any time.
CAUTION: Removing a Digital Line Card may affect your Dial Plan.
To remove a Digital Line Card:
1 From the NBX NetSet - Main Menu window (Figure 97
), click Device
Configuration.
2 Click the Digital Line Cards tab (Figure 98).
3 From the Select Device Type pull-down list, select T1/ISDN Board List and
click Apply. A list of installed Digital Line Cards appears in the T1/ISDN
Board List. Select the Digital Line Card you want to remove from the list.
4 Click Remove. A dialog box prompts you to confirm the removal. Click
Yes.
To Next Page
Loading...