320 CHAPTER 3: DEVICE CONFIGURATION
Figure 138 Digital Line Card IP Settings Dialog Box — T1 DS1
4 To assign IP addresses automatically, enter the first address in the First
IP Address field. The system sequentially adds the remaining addresses.
Assigning IP Addresses One at a Time
To assign IP addresses one at a time:
1 In the Digital Line Card IP Settings dialog box, click Assign Addresses
Individually (Figure 93
).
2 Enter the IP addresses that you want for the channels.
You must have IP licenses installed before you can enter addresses.
3 Enter the mask number appropriate for your site in the Common Subnet
Mask field.
4 Enter IP address for the Common Default Gateway, and then click Apply
and OK.
5 In the Digital Line Card IP Settings dialog box dialog box, click Apply to
effect the changes, and then click OK.
To Next Page
Loading...