Servicing the Network Call Processor Battery 411
All messages that associated with the board (for example, the
initialization process) appear in the terminal emulation window.
Servicing the
Network Call
Processor Battery
If you lose the system date and time when you reboot the
SuperStack 3 NBX system, it could mean that the Call Processor battery
must be replaced. The battery is not a user-serviceable item. If you
suspect a problem with the battery, contact your 3Com Technical Support
representative.
WARNING: There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
Getting Service and
Support
Your authorized 3Com NBX Voice Authorized Partner can assist you with
all of your support needs, including systems and cable plant design,
installation, configuration, and project management.
A choice of maintenance services, including remote diagnostics, on-site
support, telephone technical support, and hardware replacement, is
available from your 3Com NBX Voice Authorized Partner. Training and
enhancement services are also available.
Table 77 Terminal Emulation Program Properties
Property Value
Emulation VT100
Baud Rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
To Next Page
Loading...