3Com SuperStack 3 NBX - Destinationrouteentry Create

116 CHAPTER 2: DIAL PLAN
Table 22 Dial Plan Command Summary
Command Name Description
Table Create Creates a dial plan table.
TableEntry Create Creates an entry in a dial plan table.
DestinationRoute Create Creates a route that specifies the primary and
alternative destination device of a call.
DestinationRouteEntry Create Creates a destination route entry that
identifies a single destination device or device
list.
DestinationRouteOperation Create Creates a digit manipulation operation for a
destination route entry.
TimedRoute Create Creates a timed route (a route that the system
uses based on defined criteria for time of day
and day of week).
TimedRouteEntry Create Creates a timed route entry specifying either a
time of day or system mode, day of the week
criteria, and the destination route to use if
that criteria are met.
TimedRouteOperation Create Creates a digit manipulation operation for a
timed route entry.
PreTranslator Create Creates a pretranslator entry and specifies a
string of digits that are compared to the
incoming digits.
PreTranslatorEntry Create Creates a pretranslator entry and specifies a
string of digits that are compared to the
incoming digits.
PreTranslatorEntry Delete Deletes a pretranslator entry or deletes all
entries for a particular pretranslator.
PreTranslatorOperation Create Creates a digit manipulation operation for a
pretranslator entry.
ExtensionLength Specifies the length of extension numbers for
system devices.
ExtensionRange Specifies a range of extensions for each type
of device.
ExternalSettings Specifies settings for several aspects of
external devices.