3Com SuperStack 3 NBX - Modifying IP Settings for a BRI Card

256 CHAPTER 3: DEVICE CONFIGURATION
Viewing Digital Signal Processor Status
To view DSP (Digital Signal Processor) details:
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select T1/ISDN Board List and click Apply.
3 Select the BRI board you want and click Status.
4 In the Board Status dialog box, select a DSP from the DSP List and click
Details. The DSP Status window (Figure 91
) appears.
Figure 91 DSP Status Window — BRI
5 Click Close to close the DSP Status window.
6 Click OK.
Modifying IP Settings
for a BRI Card
You can modify the IP settings for a Digital Line Card to meet changing
requirements.
The board must be on the same subnetwork as the Call Processor to
modify IP settings.