3Com SuperStack 3 NBX - Identifying Devices Using Pretranslators for CLI

Managing Dial Plan Pretranslators 73
To enable a specific pretranslator, update the dial plan. See “Importing
and Exporting Dial Plan Configuration Files” earlier in this chapter.
Identifying Devices
Using Pretranslators
for CLI
To view a list of devices that use a particular pretranslator to present
Calling Line ID (CLI) information on outgoing calls:
1 In the NBX NetSet – Main Menu window, click Dial Plan.
2 Click the Pretranslators tab (Figure 16
) and select a pretranslator from the
scroll list. For a list of devices that have no pretranslator, select (none).
3 Click Devices Using Pretranslator for CLI. The Devices Using Pretranslator
for CLI dialog box appears (Figure 18
). If you selected (none) in step 3, you
see a list of devices that do not use a pretranslator for Calling Line ID.
4 To move a device to the Devices Using Pretranslator list, select it and click
<<. To move a device to the Devices Not Using Pretranslator list, select it
and click >>. Then click Close. See Table 13
for field descriptions.
Figure 18 Devices Using Pretranslator for CLI Dialog Box
Table 13 Pretranslator Fields
Field Purpose
Pretranslator ID The identification number of the pretranslator as
specified in the dial plan.
Pretranslator Name The name of the pretranslator as specified in the dial plan.
Devices Using
Pretranslator
Devices currently using the pretranslator.
Devices Not Using
Pretranslator
Devices not using the pretranslator.