3Com SuperStack 3 NBX - Page 72

72 CHAPTER 2: DIAL PLAN
Figure 16 Pretranslators Tab
3 Select a pretranslator, or (none) for devices that have no pretranslator.
4 Click Devices Using. The Devices Using Pretranslator dialog box appears
(Figure 17). If you selected (none) in step 3, you see a list of devices that do
not use a pretranslator. Table 13
describes each field. The fields are the
same for the Devices Using Pretranlator for CLI dialog box.
Figure 17 Devices Using Pretranslator Dialog Box
5 To move a device to the Devices Using Pretranslator list, select it in the
Devices Not Using Pretranslator list and click <<. To move a device to the
Devices Not Using Pretranslator list, select it in the Devices Using
Pretranslator list and click >>. Then
6 Click Close.