3Com SuperStack 3 NBX - Modifying an Attendant Console

Configuring the NBX 1105 Attendant Console 189
Modifying an
Attendant Console
This section describes how to modify an existing Attendant Console. You
can change an Attendant Console’s device number or associated
telephone. Every Console must be associated with a telephone. To modify
an existing NBX 1105 Attendant Console:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
).
2 Click the Attendant Console tab. The Attendant Console dialog box
appears (Figure 63).
3 Select the Attendant Console that you want to modify and click Modify.
The Modify dialog box appears (Figure 65).
Figure 65 Modify Attendant Console Dialog Box
4 Change the desired fields. Table 28
describes each field.
Table 28 Modify Attendant Console Status Fields
Field Purpose
MAC Address The MAC (Media Access Control) address of the
Attendant Console.
Device Name (Optional) A name that identifies this device when it
appears in lists in the NBX NetSet utility.
Associated Telephone The telephone extension associated with this Console.