3Com SuperStack 3 NBX - Removing a Line Card Port

Configuring and Managing Analog Line Card Ports 215
Figure 74 Modify Line Card Port Dialog Box
5 Specify the port information. The fields are the same as those described
in “Configuring a Line Card Port Manually”
earlier in this chapter.
6 Click OK.
Removing a
Line Card Port
When you remove a line card port that is already configured, you remove
the port information from the database.
To remove a line card port:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
).
2 Click the Line Card Ports tab. Line Card Ports dialog box appears
(Figure 72).
3 Select the port that you want to remove from the list.
4 Click Remove. A prompt asks you to confirm that you want to remove the
port.
5 Click Yes to remove the port.