3Com SuperStack 3 NBX - Modifying a T1 Card

Configuring and Managing T1 Digital Line Cards 303
Modifying a T1 Card These sections describes how to modify a T1 card that is already installed
in the system.
■ Modifying the T1 Card Name or Type
■ Modifying a T1 Span
■ Configuring Partial T1 Lines
■ Modifying Audio Controls
Modifying the T1 Card Name or Type
You can change the name of a Digital Line Card at any time. You can also
set the type to T1 or ISDN PRI.
To modify a T1 card name or type:
1 In the NBX NetSet - Main Menu window, click Device Configuration
(Figure 97
).
Figure 123 NBX NetSet - Main Menu Window
2 In the Device Configuration window, click the Digital Line Cards tab. See
Figure 124
.