System-level Troubleshooting 407
Configuration and
Status Reports
You can obtain the status of all Digital Line Cards in the NBX system with
either of these two methods:
Select the Digital Line Cards tab and:
■ Click Config & Status Report. The formatted report appears on the
screen with headings shown in a larger font.
■ Click Export Report. The unformatted report appears on the screen. To
save the report as an ASCII text file, select Save as from the File menu
of your browser.
Table 75
describes in alphabetical order (not the order of appearance) the
headings in the Configuration and Status Report.
Table 75 Configuration and Status Report Headings
Heading Description
#Chs Number of channels.
#Dsp Number of digital signal processors.
#OffCh Number of channels in the offline state.
#OnChs Number of channels in the online state.
AEClosed Autoattendant extension when business is closed.
AELunch Autoattendant extension when business is at lunch.
AEOpen Autoattendant extension when business is open.
AEOther Autoattendant extension for Other hours.
ANI Automatic Number Identification. The telephone number from
which the call originated.
Audio Input Numeric value of audio input control setting.
Audio Output Numeric value of audio output control setting.
BdId Board (card) ID number.
BdId Name Board (card) name.
Brd The number of the board (card) in a multiple board system.
CO Switch Protocol Protocol (ETS1, QSIG Slave) used by the CO switch (not
applicable to T1).
Card Type Type of card (T1, ISDN PRI, E1, BRI).
Ch Channel.
Ch List Channels supported by a DSP.
Ch MAC Address MAC address of a channel.
Ch Name Name of a channel.
To Next Page
Loading...