188 CHAPTER 3: DEVICE CONFIGURATION
Figure 64 Add Attendant Console Dialog Box
4 Fill in the fields for the new Attendant Console, as described in Table 27.
5 Click OK. The system adds the new NBX 1105 Attendant Console.
Table 27 Add Attendant Console Fields
Field Purpose
MAC Address The MAC (Media Access Control) address of the Attendant
Console (appears on the label on the bottom of the device.
Device Name (Optional) A name that identifies this device when it
appears in lists in the NBX NetSet utility.
Associated Telephone The telephone extension to associate with this Attendant
Console. Each Attendant Console must be associated with
a single NBX Business Telephone.
Auto-Assign Button
Mappings
Based on what is in the database, maps all existing
extensions, except for the Associated Telephone, to the
Access buttons on the Attendant Console. Each extension
has its own button on the Attendant Console.
The four Feature buttons along the bottom of the
Attendant Console are mapped, from left to right, to
Transfer, Transfer to Voice Mail, Park, and Hold.
Auto-Assign Button Mappings works with a new device
only. After it has been initially configured, changes to the
mappings must be done manually.
Mapping can be done manually by selecting Device
Configuration, Attendant Console, Button Mappings.
To Next Page
Loading...