EasyManua.ls Logo

3Com SuperStack 3 NBX - Page 134

3Com SuperStack 3 NBX
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134 CHAPTER 2: DIAL PLAN
TableEntry Create 1 48 91508 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 48, which
directs the system to look for the digits 91508 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such a
sequence, it assigns LongDistance as the class of service. Because the system
software does not use the priority value, the system leaves 0 (zero) as the
value, and assigns the call to route 1 (the route that uses the 4-port card).
TableEntry Create 1 49 91617 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 49, which
directs the system to look for the digits 91617 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 50 91781 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 50, which
directs the system to look for the digits 91781 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 51 91978 7 7 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 51, which
directs the system to look for the digits 91978 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).

Table of Contents