3Com SuperStack 3 NBX - Page 197

Configuring the NBX 1105 Attendant Console 197
Mapping the Attendant Console Access Buttons
To map the NBX 1105 Attendant Console Access buttons:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
).
2 Click the Attendant Console tab. The Attendant Console dialog box
appears (Figure 63).
3 Select the Attendant Console for which you want to map Feature
Buttons.
4 Click Button Mappings. The Button Mappings dialog box appears
(Figure 68
).
Figure 68 Button Mappings Dialog Box