3Com SuperStack 3 NBX - Page 209

Configuring and Managing Analog Line Card Ports 209
Figure 71 System Settings Dialog Box
3 Enable the Auto Discover Line Cards check box.
4 Click
OK.
Configuring a Line Card Port Manually
Most organizations use Auto Discovery to automatically configure line
card ports. However, you can configure a line card port manually and
select all settings.
To configure a line card port manually:
1 In the NBX NetSet - Main Menu window, click
Device Configuration. The
Device Configuration dialog box appears (Figure 49
).
2 Click the Line Card Ports tab. Line Card Ports dialog box appears
(Figure 72).