Connecting and Managing Analog Devices 229
6 Click Apply to effect the changes.
7 Click OK.
Silence Suppression Enables the Silence Suppression feature, which reduces
network traffic by replacing a period of silence with a
small silence indicator packet.
Call Record & Monitor Determines whether calls made to or from the telephone
attached to this ATA can be recorded.
Enabled ā Enables recording for all calls to or from the
analog telephone attached to this ATA or ATC port.
Disabled ā Disables recording for all calls to or from the
analog telephone attached to this ATA or ATC port.
Low Bandwidth Configures the device to operate over a low-bandwidth
link as a convenience for telecommuters at remote sites.
ADPCM Audio Only Restricts the ATA to support ADPCM audio only.
NOTE: Fax devices require Mulaw audio.
Conference Disabled Prevents this device from being used for conference calls.
Fax Machine Alerts the PSTN that voice data must be uncompressed.
Select this to send or receive faxes over ISDN PRI lines.
Return busy tone when
device is in use
Returns a busy tone to the caller if the telephone
attached to this ATC port or ATA is in use.
NOTE: If you enable this check box and the user enables
the Do Not Disturb feature on the analog telephone,
callers hear a busy tone whether or not the telephone is
in use.
Table 39 Modify ATA Fields (continued)
Field Purpose
To Next Page
Loading...