250 CHAPTER 3: DEVICE CONFIGURATION
Figure 86 Modify Group Dialog Box — BRI
5 Make the changes that you want to the group parameters. See Table 44.
6 Enable the On Line check box to bring the group on line. Click Apply for
the changes to go into effect and then click OK.
Table 44 Group Parameters
Parameter ISDN BRI Options
Group Name A name to help you to identify this group in a list.
Channel Protocol N/A
E&M Direction N/A
Start Type N/A
Digit Collection N/A
Called Party Digits N/A
Calling Party Digits N/A
Auto Extension The Auto Extension number to handle this group for any of the
Business Hours. Extension 500 is the Auto Attendant.
Trunk to Trunk The Unrestricted setting enables and the Restricted setting
disables the transfer of incoming calls to another line card port.
For example, enable Trunk to Trunk transfers if you plan to
connect a Voice Over IP (VOIP) gateway to a line card port,
permit callers to use the system to access the telephone system
from a remote location, or use it to make CO calls.
Timer Values N/A
To Next Page
Loading...