258 CHAPTER 3: DEVICE CONFIGURATION
To assign IP addresses one at a time:
1 In the Digital Line Card IP Settings dialog box, click Assign Addresses
Individually (Figure 93).
Figure 93 Modify Digital Line Card IP Settings Dialog Box — BRI
2 Enter the desired IP addresses for the channels.
You must have IP licenses installed before you can enter addresses.
3 Enter the mask number appropriate for your site in the Common Subnet
Mask field.
4 Enter IP address for the Common Default Gateway.
5 Click Apply.
6 Click OK.
7 In the Digital Line Card IP Settings dialog box dialog box, click OK.
To Next Page
Loading...