Configuring and Managing E1 Digital Line Cards 275
previously a member of Group 1. If you then view the Group 1
membership list, it contains the channel you just removed from Group 2.
9 Click Close.
Removing an E1 Group
You may want to remove groups if you no longer need them.
To remove a group:
1 Return to the Digital Line Cards tab.
2 From the Select Device Type pull-down list, select ISDN PRI Group List.
3 Click Apply.
4 Select the group you want to remove.
5 Click Remove. A prompt appears asking if you want to remove the group.
6 Click Yes to remove the group.
To Next Page
Loading...