278 CHAPTER 3: DEVICE CONFIGURATION
7 To bring the card online, enable the On Line check box. Click Apply and
then click OK.
Viewing the Status of an E1 Card Channel
To view the status of a channel on an installed E1 card:
1 On the Digital Line Cards tab, select ISDN PRI Channel List from the
Select Device Type pull-down list. Click Apply.
2 Select the channel for which you want status information.
3 Click Status. A Channel Status dialog box (Figure 106
) appears.
Figure 106 Channel Status Dialog Box — E1 ISDN PRI
4 View the status of the channel and then refresh the Channel Status
dialog box.
a From the Dialog Refresh pull-down list, select:
■ Manual — To manually refresh the Channel Status dialog box each
time that you click the Apply button.
■ A time interval (5, 10, 15, 30, or 60 seconds) — To refresh the
Channel Status dialog box at the specified intervals.
b Enable the Device Refresh check box.
5 Click Apply and then click OK.
To Next Page
Loading...