Configuring and Managing T1 Digital Line Cards 297
Figure 118 Modify Board Dialog Box — T1 ISDN PRI
5 To change the name of the T1 Digital Line Card, enter a new name in the
Board Name field. You can use alphanumeric characters, dashes, and
underscores. The maximum name length is 30 characters.
6 From the Card Type pull-down list, select ISDN PRI.
7 Click OK. The Digital Line Cards tab (Figure 113
) reappears.
8 Wait until the entry for this Digital Line Card in the Type column changes
to PRI. To see the change, you may need to wait a minute or two, and
refresh your browser window.
9 After the board type changes, from the Select Device Type pull-down list,
select ISDN PRI Channel List.
10 Click Apply. The dialog box (Figure 119
) is updated to show the
ISDN PRI Channel List.
To Next Page
Loading...