Configuring and Managing T1 Digital Line Cards 313
8 Click Apply to effect the changes.
9 Click OK.
Changing T1 Group Membership
You can change the channel membership in a group to accommodate
changing needs.
To change group membership:
1 Return to the Digital Line Cards tab.
2 From the Select Device Type pull-down list, select either T1 Group List (for
DS1), or ISDN PRI Group List (for ISDN PRI)
3 Click Apply.
4 Select the group for which you want to change membership.
5 Click Membership. The dialog box that appears depends on the group list
you select. Figure 87
shows the T1 Group Membership dialog box.
Figure 131 Manage Group Membership Dialog Box
6 To add a channel to the Member List, select the channel in the Non
Member List and click <<.
If you select the Copy Group Settings to Channels check box, the system
copies the settings of the selected group to each channel you add or
To Next Page
Loading...