3Com SuperStack 3 NBX - Page 420

420 APPENDIX A: CONNEXTIONS H.323 GATEWAY
2 Access and record the Call Processor MAC address:
a In the NBX NetSet - Main Menu window, click Reports.
b Click the System Data tab.
c Record the MAC address.
MAC addresses use colons as separators. Take care to record the Call
Processor MAC Address, not the Music-on-Hold MAC address, which also
appears in the System Data tab.
3 Determine the number of port licenses:
a Return to the NBX NetSet - Main Menu window.
b Click Operations.
c Click the Licenses tab.
d Record the number of licenses for the H.323 Gateway.
e Click Add License.
f Enter the License Key (must be purchased) to unlock the license. To
obtain a license key, contact 3Com order management or your
supplier.
g Click OK.
Do NOT click Apply. If you click Apply and then OK, the system warns you
that you have an invalid license.
4 Specify Auto Discovery:
a Return to the NBX NetSet - Main Menu window.
b Click System Configuration.
c On the System Settings tab, click System Wide.
d Check Auto Discover Line Cards.
e Click OK.