Configuring the Dial Plan for VPIM 77
Figure 22 contains sample lines which, when added to an existing dial
plan, implement VPIM connections to two other NBX systems, one in
Atlanta and one in Dallas. Table 14
explains each entry.
Figure 22 Dial Plan with VPIM Implementation Commands
Table Create 1 Internal Extensions
/ Id Entry Digits Min Max Class Prio Route
/ -- ----- ----------- --- --- ------------- ---- -----
TableEntry Create 1 45 V82 5 5 WAN 0 532
TableEntry Create 1 46 V83 6 6 WAN 0 533
/ Route Description
/ ----- -----------
DestinationRoute Create 532 Atlanta VPIM Connection
DestinationRoute Create 533 Dallas VPIM Connection
/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 532 1 *0003
DestinationRouteEntry Create 533 1 *0003
/ Route Entry OperId Operation Value
/ ----- ----- ------ --------- -----
DestinationRouteOperation Create 532 1 1 stripLead 3
DestinationRouteOperation Create 532 1 2 prepend 10*234*101*222*
DestinationRouteOperation Create 533 1 1 stripLead 3
DestinationRouteOperation Create 533 1 2 prepend 10*234*101*100*
Tab l e 1 4 Explanation of Entries in Figure 22
Field Purpose
Table Create 1 Internal Extensions
This command is already present in all default dial
plans, and is included here as a reference point for
subsequent commands.
TableEntry Create 1 45 V82 5 5 WAN 0 532
TableEntry Create 1 45 This portion of the command creates entry 45 in
dial plan table 1 (the Internal Extensions table). The
choice of 45 as the entry number depends on how
many entries exist in table 1. This example assumes
that the highest number assigned to a previously
existing entry was 44.
To Next Page
Loading...