3D Systems Cube 2nd Generation User Manual

18
4. Remove print pad from foam under Cube and set aside.
5. Lift foam that Cube was sitting on to access power supply and other accessories.
Note: Retain packaging and Cube carton for future transporting.
Remove
Foam
2. Lift foam from the top of Cube. Remove foam from the midsection and below the pad by gently pulling out from the front.
3. LiftCubeoutoftheboxandplaceontablethathasaatworkingsurfacewhichisatleast4timesaslargeasbaseofthe
Cube.

3D Systems Cube 2nd Generation Specifications

General

Brand	3D Systems
Model	Cube 2nd Generation
Category	3D Printers
Language	English