3D Systems Cube 2nd Generation User Manual

51
FINISHING YOUR CREATION
Removing your Creation From the Print Pad
• Placeprintpadwiththecreationinacontainer(notsupplied)lledwithregularwarmtapwaterandletsoakapproxi-
matelyveminutesoruntilyourcreationbecomesfreefromtheprintpad.Cleananddryprintpadbeforenextuse.
• Refer to the Cube User Guide for instructions for “Cleaning Print Pad” in Maintaining your Cube, to remove the glue
from the print pad.
25

3D Systems Cube 2nd Generation Specifications

General

Brand	3D Systems
Model	Cube 2nd Generation
Category	3D Printers
Language	English