3D Systems Cube 2nd Generation User Manual

32
4. Open your “Internet Access” Located in your Network Set-
tings.
Note: Always select your Cube from your network settings be-
fore opening Cubify Software.
5. Scroll and select your Cube on the menu. Click on “con-
nect.” This may take several minutes to connect. Once
connected,youcansendprintlesfromCubifysoftware
straight to your Cube.
Set up a computer (WPS) network
1. Press and hold the WPS button on your wireless-router
untilthebuttonstartsashing.
2. Open your “Internet Access” located on your computer’s
taskbar.
3. Scroll and select the network for your router on the menu.
Click on “connect.” This may take a few minute to connect.
WPS (WI-FI Protected Setup) allow easy establishment of a secure wireless network. All new wireless-routers are set up for
WPS. To be sure, look for the WPS logo on your wireless-router box. WPS connection will allow you to connect to your printer
through the Cubify Software.
4. Tap on “SETUP” in the main menu and scroll until you come to the WI-FI set up screen
Tap Here

3D Systems Cube 2nd Generation Specifications

General

Brand	3D Systems
Model	Cube 2nd Generation
Category	3D Printers
Language	English