3D Systems Cube 2nd Generation - UNPACKING and SETTING up the Cube

17
UNPACKING AND SETTING UP THE Cube
What’s Included:
1. Remove white plastic inserts from each side of box. Pinch and bend insert out. Next, pull insert out of box to remove. Lift
top of carton up and remove.
Plastic
Inserts
Pinch &
Bend Out
Remove
Insert
The Cube (1)
PLA Material Cartridge
(1)
Print Pad (1)
USB Memory
Stick(1)
Cube Glue (1)
Power Cord (1)
Power Supply (1)
Quick Start Up
Guide (1)
USB Cable (1) This
cable is used to
downloadrmware
only.
Cube Tube (1)
7
Note: Retain packaging and Cube carton for future transporting.
Cube Photo Booth
Insert (1) (Use as a
backdrop to display
your creations.)
Unclog Tool (1)