3D Systems Cube 2nd Generation User Manual

14
Cube 3D PRINTER FEATURES
Theprintjetprinttipheatsthematerialandproducesathinowingmaterialofplasticcreatinglayersthatadherestotheprint
pad. After each layer is produced, the print pad lowers so that a new layer can be drawn on top of the last. This is the process
continues until the last layer on the top of the creation is jetted.
4
Cube 3D Printer Features
• Prints objects up to 5.5 X 5.5 X 5.5 in. (140 x 140 x 140 mm)
•
EZLoadPrintCartridge
• Durable, ABS & PLA Plastic
• 25 Free 3D Print creations
• USB & WI-FI Connectivity
Cube 3D Printer Properties
• Technology: Plastic Jet Printing (PJP)
• printjets – Single Jet
• Max. Creation Size - 5.5” x 5.5” x 5.5” (14 x 14 x 14 cm)
• Material- Tough Re-cyclable plastic
• Layer Thickness – 10 mil | 0.01 inches 250 microns | 0.25 mm
• Supports: Fully Automated; Easy to peel off
• Cartridge: 1 Cartridge prints 13 to 14 mid-sized creations
• Material Color Choices – See Cubify website for color choices

3D Systems Cube 2nd Generation Specifications

General

Brand	3D Systems
Model	Cube 2nd Generation
Category	3D Printers
Language	English