64171, Rev. 10/May 2019
3M™ GMI™ PS200 PORTABLE GAS MONITOR
OPERATION
3-4
Figure 3-6: Date and Time
3.3.4. BUMP DUE DATE (OPTION)
This configurable option is disabled by default but can be configured to:
• indicate briefly that bump test is due, as illustrated in Figure 3-7: Bump Due Date;
• indicate that bump test is overdue then pause awaiting user acceptance, as illustrated in
Figure 3-8: Bump Overdue;
• force the user to switch monitor OFF when overdue.
This feature also comes with a factory-set option to display the number of days remaining until the
next bump is due.
Figure 3-7: Bump Due Date
Figure 3-8: Bump Overdue
To continue, press the R button once to acknowledge bump test is overdue.
To abort warm-up and automatically switch the monitor OFF, press the L button once.
To Next Page
Loading...
