64171, Rev. 10/May 2019
3M™ GMI™ PS200 PORTABLE GAS MONITOR
ACCESSORIES*
10-1
10. ACCESSORIES*
*Refer to https://gasdetection.3m/en/ps200 for the complete range of PS200 accessories.
Table 10-1: Supplied Accessories
Part Number Description
64136 3.0 meters (9’-9”) PVC Sample Line Tubing & Connector - Pumped monitors Only
64172 Quick Operating Instructions
64247 Power Adapter (c/w USB/mini-USB Cable)
64260 Charging/Comms Clip (mini-USB)
64171 Operation & Maintenance Manual (PDF)
64191 Quick Start Guide (PDF)
Table 10-2: Optional Accessories
Part Number Description
66123 Hand Aspirator
66478 Hand Aspirator c/w 3.0 meters (9’-9”) tubing
66112 Sample Line Extender
66485 In-Line Hydrophobic Filter Assembly
66545 Ball Float
64151 PS200 Confined Space Probe
64100 Carrying Case
64150 PS200 Confined Space Demonstration Kit
64160 PS200 Field Kit
Table 10-3: Charging Accessories
Part Number Description
64138 5-Way Charger
64248 In-Vehicle Charging Adapter (12V/24V - USB)
64491 In-Vehicle Charging Cradle
Table 10-4: Manual Bump & Field Calibration Kit
Part Number Description
64051
Manual Bump Kit (c/w Combi Test Gas 99146, Direct Flow Regulator, tubing & sam-
ple line connector)
943-000QBK-4M9 Combi-Gas EcoBump Kit
Table 10-5: Automatic Bump & Calibration Accessory (ABC)
Part Number Description
64052 Automatic Bump & Calibration Station (6mm fittings; includes PSU/USB/Softeware)
64052Q Automatic Bump & Calibration Station (1/4” fittings; includes PSU/USB/Software)
99118 On Demand Flow Regulator
To Next Page
Loading...
Need help?
General
