A10 Thunder Series 930 Installation Guide
Interface Connections
Document No.: TH-930-001 - 1/26/2015 | page 10
Specifications for the equipment rack are listed in Table 2.
Rack-mount installation instructions are available in “Rack Mount Kit Installation” on page 27
.
Sliding rail installation instructions are available in “
Sliding Rail Kit Installation” on page 31.
• Product documentation, CD (User Manuals, Release Notes, and so on)
Other Requirements
Other equipment needed for installation:
• Notebook or workstation PC (Windows, Linux, Mac)
– Must have compatible Ethernet connectivity
• Supported Web browser
• Terminal Emulation Software (PuTTy, HyperTerminal, or similar)
Interface Connections
The Thunder 930 model provides the following interfaces:
• Ethernet Data Interfaces
• 6 x 1 Gb Copper data ports
• 2 x 1 Gb Fiber data ports
• 2 x 10 Gb Fiber data ports
• Management Interfaces
• 1 serial console interface (Console)
• 1 Ethernet interface (Mgmt) for remotely managing the device over the network