A10 Thunder series 930 User Manual

A10 Thunder Series 930 Installation Guide
Power Supply Hot Swap
Document No.: TH-930-001 - 1/26/2015 | page 20
Removing a Power Supply
To remove a power supply:
1. Push and hold the panel to unlock the lock (A).
2. Hold the panel and pull out the power supply
Inserting a Power Supply
To insert a power supply:
1. Push the power supply into the slot.
2. Plug the DC/AC power cable into the power supply.

A10 Thunder series 930 Specifications

General

Brand	A10
Model	Thunder series 930
Category	Switch
Language	English