EasyManua.ls Logo

A&D GF-30K - Options and Peripheral Instruments

A&D GF-30K
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
94
20-2. Options and Peripheral Instruments
AD-8121B Printer
Compact dot-matrix printer
Statistical function, clock and calendar function,
interval print function, graphic print function, dump print
mode
5 x 7 dots, 16 characters per line
Print paper (AX-PP143, 45 (W) x 50 (L) mm , ø65 mm)
AC adapter or alkaline battery
Options
Order code Name and description
GX-04K
Comparator Output (Relay/ with a Buzzer) / RS-232C / Current Loop
This option generates a relay output corresponding to HI , OK and
LO in the display.
Current loop and RS-232C can be used at the same time.
For example, a personal computer and an AD-8121B printer can be
used simultaneously.
This option is installed in place of the standard RS-232C serial
interface.
GX-06K
Analog Voltage Output / Current Loop
This option outputs a voltage of 0 to1V (or 0.2 to1V) depending on
the displayed value.
With this option, current loop can be used.
For example, an AD-8121B printer can be used simultaneously
using this option.
This option is installed in place of the standard RS-232C serial
interface. So, RS-232C is not available for use.
GX-07K
Waterproof and Dustproof RS-232C Cable
Length 5m, straight type, D-sub 9pin - D-sub 25pin.
25pin of balance side is only waterproof type.
GXK-012
Animal Weighing Bowl
This bowl can be used to weigh a small animal.
When using this bowl, the weighing range that can be used is an
approximately 1.5 kg less than the weighing capacity.
Note When option GX-04K or GX-06K is installed in the balance, the balance does not
comply with IP-65 (waterproof and dustproof).

Table of Contents

Related product manuals