xi
obstructions, or in other locations where signal strength is weak.
Doing so may result in frequent loss of connection, very slow
communication speeds and errors.
The following examples are general causes of malfunction and
countermeasures.
Use of mobile phones
Radio waves may cause unexpected malfunctions.
Wireless communication devices, home networking
devices such as walkie-talkies mobile phones, cordless
phones and these types of communication devices can
affect the recorder. Therefore, they are necessary to
keep a minimum distance of 33 m or more from the
recorder.
If there is static electricity in the usage environment (discharges
from devices or the surrounding area)
Before using the recorder, ensure that the operator and
patient have discharged static electricity.
Humidify the room.
Using close to an IEEE802.11g/b/n wireless LAN device may
cause mutual interference to occur, which may result in reduced
communication speeds or prevent connection. In this case,
switch off the power supply to the device that is not being used,
or use the monitor in a different location.
9. Environmental Protection
Before disposing of the recorder, remove the lithium battery from
the recorder.
To Next Page
Loading...
